Microbiology Incubator

SHEL LAB general purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models.

Microbiology Incubator

SMI 2

This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls.

This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door, ensure uniform heating, even when the incubator chamber is fully loaded.

The General Purpose Incubator Family ranges in size from 2 to 38.6 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that is unrivaled.

Features Include:

  • Microprocessor Control
  • Independent Overtemperature Thermostat
  • Unique Warm Air Jacket Design
  • Interior_Outlet
  • Heated Outer Door
  • Viewing Door
  • Small Foot Print
  • Stainless Steel Interior
  • 24 Month Limited Warranty

Specification

Item Specification
MODEL SMI2
PART ID SMI2
EXTERIOR DIMENSIONS (W × D × H) 21.3 × 22.3 × 26.0 
(541 mm × 566 mm × 660 mm)
INTERIOR DIMENSIONS (W × D × H) 15.0 × 15.0 × 15.2 
(381 mm × 381 mm × 386 mm)
VOLUME 2.0 cu.ft. (56.3 L)
SHELF DIMENSIONS (W × D) 14.3 × 14.3 (363 mm × 363 mm)
UNIT WEIGHT 83.0 lbs (37.6 kg)
INTERIOR METAL 430 SST
EXTERIOR METAL Painted Cold Roll Steel
OPERATING TEMPERATURE RANGE Amb +8C – 70C
TEMPERATURE UNIFORMITY – MIDRANGE 0.5 °C
TEMPERATURE STABILITY – MIDRANGE 0.1 °C
CONTROLLER TYPE Digital
DISPLAY RESOLUTION 0.1 °C
POWER VOLTAGE , FREQUENCY AND CURRENT 100-120 VAC, 50/60 Hz, 4.5 Amps
MAX HVAC LOAD 1218 BTUs/hr
SAFETY CERTIFICATIONS UL 61010-1, EN 61010-1, CSA 61010-1, CE

SMI6

SHEL LAB general purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls.

This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door, ensure uniform heating, even when the incubator chamber is fully loaded.

The General Purpose Incubator Family ranges in size from 2 to 38 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that is unrivaled.

Features include:

  • Microprocessor Control
  • Independent Overtemperature Thermostat
  • Unique Warm Air Jacket Design
  • Interior_Outlet
  • Heated Outer Door
  • Viewing Door
  • Small Foot Print
  • Stainless Steel Interior
  • 24 Month Limited Warranty

Specification

Item Specification
MODEL SMI6
PART ID SMI6
EXTERIOR DIMENSIONS (W × D × H) 25.3 × 27.3 × 38.0 
(643 mm × 693 mm × 965 mm)
INTERIOR DIMENSIONS (W × D × H) 19.5 × 20.0 × 26.0 
(495 mm × 508 mm × 660 mm)
VOLUME 5.9 cu.ft. (166 L)
SHELF DIMENSIONS (W × D) 18.3 × 18.3 (465 mm × 465 mm)
UNIT WEIGHT 158.0 lbs (71.7 kg)
INTERIOR METAL 430 SST
EXTERIOR METAL Painted Cold Roll Steel
OPERATING TEMPERATURE RANGE Amb +8C – 70C
TEMPERATURE UNIFORMITY – MIDRANGE 0.5 °C
TEMPERATURE STABILITY – MIDRANGE 0.1 °C
CONTROLLER TYPE Digital
DISPLAY RESOLUTION 0.1 °C
POWER VOLTAGE , FREQUENCY AND CURRENT 100-120 VAC, 50/60 Hz, 6.0 Amps
MAX HVAC LOAD 1860 BTUs/hr
SAFETY CERTIFICATIONS UL 61010-1, EN 61010-1, CSA 61010-1, CE

SMI7

SHEL LAB general purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls.

This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door, ensure uniform heating, even when the incubator chamber is fully loaded.

The General Purpose Incubator Family ranges in size from 2 to 40 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that is unrivaled.

Features include:

  • Microprocessor Control
  • Independent Overtemperature Thermostat
  • Unique Warm Air Jacket Design
  • Interior Outlet
  • Heated Outer Door
  • Viewing Door
  • Small Foot Print
  • Stainless Steel Interior
  • 24 Month Limited Warranty

Specification

Item Specification
MODEL SMI7
PART ID SMI7
EXTERIOR DIMENSIONS (W × D × H) 30 × 31 × 32 
(762 mm × 787 mm × 813 mm)
INTERIOR DIMENSIONS (W × D × H) 23.7 × 24 × 20 
(602 mm × 610 mm × 508 mm)
VOLUME 6.5 cu.ft. (184 L)
SHELF DIMENSIONS (W × D) 22.8 × 22.8 (579 mm × 579 mm)
UNIT WEIGHT 162.0 lbs (73.5 kg)
INTERIOR METAL 430 SST
EXTERIOR METAL Painted Cold Roll Steel
OPERATING TEMPERATURE RANGE Amb +8C – 70C
TEMPERATURE UNIFORMITY – MIDRANGE 0.5 °C
TEMPERATURE STABILITY – MIDRANGE 0.1 °C
CONTROLLER TYPE Digital
DISPLAY RESOLUTION 0.1 °C
POWER VOLTAGE , FREQUENCY AND CURRENT 100-120 VAC, 50/60 Hz, 6.5 Amps
MAX HVAC LOAD 1860 BTUs/hr
SAFETY CERTIFICATIONS UL 61010-1, EN 61010-1, CSA 61010-1, CE

SMI11

SHEL LAB general purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls.

This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door, ensure uniform heating, even when the incubator chamber is fully loaded.

This superior line of incubators has created a level of comfort and convenience for professionals that is unrivaled.

Features include:

  • Microprocessor Control
  • Independent Overtemperature Thermostat
  • Unique Warm Air Jacket Design
  • Interior_Outlet
  • Heated Outer Door
  • Viewing Door
  • Small Foot Print
  • Stainless Steel Interior
  • 24 Month Limited Warranty

Specification

Item Specification
MODEL SMI11
PART ID SMI11
EXTERIOR DIMENSIONS (W × D × H) 42 × 27 × 38 
(1067 mm × 686 mm × 965 mm)
INTERIOR DIMENSIONS (W × D × H) 36.2 × 20 × 26 
(920 mm × 508 mm × 660 mm)
VOLUME 10.9 cu.ft. (309 L)
SHELF DIMENSIONS (W × D) 15.1 × 18.5 (384 mm × 470 mm)
UNIT WEIGHT 195.0 lbs (88.5 kg)
INTERIOR METAL 430 SST
EXTERIOR METAL Painted Cold Roll Steel
OPERATING TEMPERATURE RANGE Amb +8C – 70C
TEMPERATURE UNIFORMITY – MIDRANGE 0.5 °C
TEMPERATURE STABILITY – MIDRANGE 0.1 °C
CONTROLLER TYPE Digital
DISPLAY RESOLUTION 0.1 °C
POWER VOLTAGE , FREQUENCY AND CURRENT 100-120 VAC, 50/60 Hz, 7.0 Amps
MAX HVAC LOAD 2374 BTUs/hr
SAFETY CERTIFICATIONS UL 61010-1, EN 61010-1, CSA 61010-1, CE

SMI12

SHEL LAB general purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls.

This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door, ensure uniform heating, even when the incubator chamber is fully loaded.

The General Purpose Incubator Family ranges in size from 2 to 38 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that is unrivaled.

Features include:

  • Microprocessor Control
  • Independent Overtemperature Thermostat
  • Unique Warm Air Jacket Design
  • Interior_Outlet
  • Heated Outer Door
  • Viewing Door
  • Small Foot Print
  • Stainless Steel Interior
  • 24 Month Limited Warranty

Specification

Item Specification
MODEL SMI12
PART ID SMI12
EXTERIOR DIMENSIONS (W × D × H) 25.3 × 27.3 × 76.0 
(643 mm × 693 mm × 1930 mm)
INTERIOR DIMENSIONS (W × D × H) 19.5 × 20 × 26 
(495 mm × 508 mm × 660 mm)
VOLUME 11.7 cu.ft. (332 L)
SHELF DIMENSIONS (W × D) 18.3 × 18.3 (465 mm × 465 mm)
UNIT WEIGHT 316.0 lbs (143.3 kg)
INTERIOR METAL 430 SST
EXTERIOR METAL Painted Cold Roll Steel
OPERATING TEMPERATURE RANGE Amb +8C – 70C
TEMPERATURE UNIFORMITY – MIDRANGE 0.5 °C
TEMPERATURE STABILITY – MIDRANGE 0.1 °C
CONTROLLER TYPE Digital
DISPLAY RESOLUTION 0.1 °C
POWER VOLTAGE , FREQUENCY AND CURRENT 100-120 VAC, 50/60 Hz, 12.0 Amps
MAX HVAC LOAD 3720 BTUs/hr
SAFETY CERTIFICATIONS UL 61010-1, EN 61010-1, CSA 61010-1, CE

SMI31

This incubator provides extra large capacities while minimizing the amount of floor space needed. The temperature in this large space is kept uniform by integrating a highly responsive microprocessor with an appropriately sized heating element. An independent secondary temperature controller offers the added security of over temperature protection.

Our unique forced air circulation system creates a one-pass circulation pattern that provides both exceptional temperature uniformity and rapid heat recovery. The chamber floors are ruggedly reinforced to support roller apparatus or shakers. The SMI31 is supplied with six sturdy shelves that will not sag or bend under heavy loads.

The General Purpose Incubator Family ranges in size from 2 to 38 cu.ft. This this superior line of incubators has created a level of comfort and convenience for professionals that is unrivaled.

Features include:

  • Microprocessor Control
  • Viewing Window
  • Roller Bottle Apparatus Accommodation
  • Interior_Outlet
  • Powder Coated White Interior
  • Six Shelves
  • 24 Month Limited Warranty

Specification

Item Specification
MODEL SMI31
PART ID SMI31
EXTERIOR DIMENSIONS (W × D × H) 38 × 32.5 × 73.3 
(965 mm × 826 mm × 1861 mm)
INTERIOR DIMENSIONS (W × D × H) 32.6 × 26 × 64.1 
(828 mm × 660 mm × 1628 mm)
VOLUME 30.8 cu.ft. (872 L)
SHELF DIMENSIONS (W × D) 25 × 32.4 (635 mm × 823 mm)
UNIT WEIGHT 406 lbs (184 kg)
INTERIOR METAL Painted Cold Roll Steel
EXTERIOR METAL Painted Cold Roll Steel
OPERATING TEMPERATURE RANGE Amb +8C – 70C
TEMPERATURE UNIFORMITY – MIDRANGE 0.8 °C
TEMPERATURE STABILITY – MIDRANGE 0.1 °C
CONTROLLER TYPE Digital
DISPLAY RESOLUTION 0.1 °C
POWER VOLTAGE , FREQUENCY AND CURRENT 110-120 VAC, 50/60 Hz, 12.0 Amps
MAX HVAC LOAD 3084 BTUs/hr
SAFETY CERTIFICATIONS UL 61010-1, EN 61010-1, CSA 61010-1, CE

SMI39

This incubator provides extra large capacities while minimizing the amount of floor space needed. The temperature in this large space is kept uniform by integrating a highly responsive microprocessor with an appropriately sized heating element. An independent secondary temperature controller offers the added security of over temperature protection.

Our unique forced air circulation system creates a one-pass circulation pattern that provides both exceptional temperature uniformity and rapid heat recovery. The chamber floors are ruggedly reinforced to support roller apparatus or shakers. The SMI39 is supplied with six sturdy shelves that will not sag or bend under heavy loads.

The General Purpose Incubator Family ranges in size from 2 to 38.6 cu.ft. This this superior line of incubators has created a level of comfort and convenience for professionals that is unrivaled.

Features include:

  • Microprocessor Control
  • Viewing Window
  • Roller Bottle Apparatus Accommodation
  • Interior_Outlet
  • Powder Coated White Interior
  • Six Shelves
  • 24 Month Limited Warranty

Specification

Item Specification
MODEL SMI39
PART ID SMI39
EXTERIOR DIMENSIONS (W × D × H) 41.5 × 32.8 × 90.3 
(1054 mm × 833 mm × 2293 mm)
INTERIOR DIMENSIONS (W × D × H) 35.6 × 26 × 76 
(904 mm × 660 mm × 1930 mm)
VOLUME 38.6 cu.ft. (1093 L)
SHELF DIMENSIONS (W × D) 24 × 34.4 (610 mm × 874 mm)
UNIT WEIGHT 497 lbs (225 kg)
INTERIOR METAL Painted Cold Roll Steel
EXTERIOR METAL Painted Cold Roll Steel
OPERATING TEMPERATURE RANGE Amb +8C – 70C
TEMPERATURE UNIFORMITY – MIDRANGE 0.8 °C
TEMPERATURE STABILITY – MIDRANGE 0.1 °C
CONTROLLER TYPE Digital
DISPLAY RESOLUTION 0.1 °C
POWER VOLTAGE , FREQUENCY AND CURRENT 110-120 VAC, 50/60 Hz, 14.5 Amps
MAX HVAC LOAD 3971 BTUs/hr
SAFETY CERTIFICATIONS UL 61010-1, EN 61010-1, CSA 61010-1, CE